Tag: PM85

Categories
Technology

RF851 UHF Sled: Pair with PM85 by Bluetooth

Just a few steps required: Pairing RF851 with PM85

You got yourself an RF851 UHF sled for your warehouse, but you are not sure how to connect it with your PM85? Worry not – this little tutorial will shed some light into the connecting process.

Follow these steps

  1. Download & install the RFID Demo app
  2. Turn on the RF851 by pressing the Power button on the right side. A red LED will light up on the left side.
  3. Now take your PM85 and open up the RFID Demo app
  4. On the top left side, tap “Bluetooth” to turn Bluetooth on
  5. Tap “Search Reader” on the top right side
  6. And then choose your RF851 from the list by tapping “CONNECT”

Done! The red LED on the left side will now turn green, which means both devices are paired successfully! All that’s left to do now is mount the PM85 on top of the RF851 like so: Slide the PM85 in with the left or right side first, then push down the other side to lock it in place.

Check out this illustration:

As you see, using RF851 and PM85 is fairly simple.

Did you know? You can also charge both devices simultaneously through the 1 Slot Cradle for RF851. Watch the video to find out how.

Visit RF851’s product page ? 

Categories
Technology

PM45/PM85: How to connect Dual Slot Cradles for charging multiple devices simultaneously

Charge up to six devices by connecting three Dual Slot Cradles
Dual Slot Cradle
How to connect Dual Slot Cradles – instruction video

In industrial settings, accessories take a big part to promote productivity – one of their roles is preventing workers from losing time on charging and then deploying devices. It is an essential element of keeping the workflow simple and efficient. Point Mobile’s Dual Slot Cradle for PM45 and PM85 is designed to charge multiple devices simultaneously with maximum convenience so that only minimal force is needed to insert and pick up the devices.

Let’s take an example of the PM45 Dual Slot Cradle. Here is an easy six-step instruction about how to connect the Cradles to charge them with one power supply (if you want better visualization, check out the video instruction above).

  1. Pick up the cradle and push out the cap by using both thumbs.
  2. Pick up to the other cradle and remove the cap by using fingernails.
  3. Connect the cradles to engage them.
  4. Turn the cradles upside down to mount the bracket.
  5. When you connect the bracket, check if it’s in the right direction.
  6. Screw in the two screws to firmly connect the cradles.

Now, connect Dual Slot Cradles to charge multiple devices at the same time, and enjoy easy charging and deployment keeping the workflow smooth.

Visit PM45’s product page ? 
Visit PM85’s product page ?